Applicable product
Class A PSE specific electrical appliance certification scope
Wires and cables, fuses, wiring appliances (electrical accessories, lighting, etc.), the current limiter, transformers, ballast, electric appliances, electric mechanical appliance (home appliances), electronic application mechanical equipment (high frequency hair removal), other communication with the electrical machinery (electric, dc power supply device), with the engine;
It must be certified by a third party certification body approved by the Ministry of Economy, Trade and Industry of Japan. According to the DENAN Act, the manufacturer is obliged to keep the test results and the certification label must bear the diamond PSE logo.
Class B Japanese non-specific ELECTRICAL PSE certification range
Circular PSE mark certified products in Japan, all belong to the “non specific electrical appliance” products directory, enter the Japanese market, must be approved by the Japanese ministry of economy of laboratory test, confirmed in accordance with the Japanese electrical appliance technology benchmark, obtains the qualification testing report PSE certificate, after the product with PSE circular logo, product to Japan market sales.
Test Introduce
PSE test is a mandatory safety test in Japan, used to prove that electrical and electronic products have passed the safety standard test of DENAN Law of Japan or international IEC standards.
Buyers in Japan must register their purchases with the Ministry of Economy, Trade and Industry (METI) within one month of purchase. All electrical and electronic products in the DENAN catalogue for sale in the Japanese market must pass PSE test.

character mandatory mandatory
Conformity assessment procedures: Third party testing by a METI approved Conformity Assessment and Verification Unit (CAB) is required Self-declaration method
Required standards The security+EMC The security + EMC
The factory inspection DENAN technical specification must be followed Perform factory inspection
Members of the CB System yes
Technical information
voltage 100Vac
frequency 50 Hz / 60 Hz
The plug Japan’s specifications JIS-C8303

Test criteria
Contents to be updated……
Authentication way

With the accession of more and more countries to the WTO, in order to be in line with the international standards, many countries have enacted laws and regulations on the safety, energy saving, environmental protection and other technical indicators of all kinds of goods to limit, so as to ensure the level of their own industry and market, but also formed a certain technical barrier.

Japan is a country with a complicated safety law system. Foreign products trying to enter the Japanese market will face high barriers. BORY helps you get the PSE certificate easily.

1, “Electrical Equipment Safety Act (DENAN)” requirements

Buyers in Japan must register their purchases with the Ministry of Economy, Trade and Industry (METI) within one month of purchase. All electrical and electronic products in the DENAN catalogue for sale in the Japanese market must pass PSE certification. Japan s DENAN has divided electric and electronic products into two categories: 115 specific products; Non-specified electrical products, including 338 products. Specific electrical products must be inspected by a third party certification body (CES) authorized by THE Ministry of Economy, Trade and Industry of Japan (METI) for products and factory test equipment, and PSE certificate will be issued with a validity period of 3 to 7 years, and PSE diamond logo will be affixed to the products. For non-specific electrical products, the conformity of the products shall be proved by self-inspection and declaration, and PSE circular mark shall be affixed to the products.

2. Meet DENAN’s approach and requirements

ø According to DENAN requirements, PSE certified products must meet the requirements of the relevant safety technical standards. There are two kinds of technical standards of electrical product safety in Japan:

(1) Japanese Technical Standard 1 refers to the Domestic technical standard of Japan, which is quite different from the technical requirements of IEC standard and has an independent system.

(2) Japan Technical Standard 2, issued by the Japanese government in 2002 in accordance with the relevant IEC standards, but not all electrical products have a corresponding technical Standard 2 standard.

ø Manufacturers can choose to carry out the suitability test according to technical standard 1 or technical Standard 2. PSE mark can be affixed after passing the test. In general, technical datum 1 and 2 should not be mixed.

PSE certification applicants can be manufacturers or importers.

ø DENAN also requires the buyer’s name or ID to be marked on the product, so as to supervise and manage the product in the future sales process.

ø The safety responsibility of the products imported to Japan is entirely borne by the Japanese importer. Therefore, the importer must keep the test report and inspection record, and can also check the inspection record through the computer network.

3. How do Chinese manufacturers obtain PSE certification

Chinese manufacturers shall first determine whether the products they apply for fall within the certification scope authorized to be accepted by China Quality Certification Center (hereinafter referred to as “CQC”). As CQC is currently authorized on the basis of Technical Benchmark 2, manufacturers must choose Technical Benchmark 2 to apply for PSE certification. After confirmation, the manufacturer may submit a written application to CQC and submit the samples and technical data to PSE certified Laboratory for type test.

As China and Japan are members of IECEE-CB system, the test report can also be directly converted from CB report. Upon completion of the test report, the applicant shall provide the user manual or assembly manual in Japanese, product related structure and component information, testing equipment related information, factory quality inspection report (including 100% electrical strength test report of production line, operation inspection record, etc.) and accept factory inspection arranged by CQC. If you pass a factory inspection, you will receive the PSE certification.

The certification process involved in applying for the diamond PSE certificate issued by CQC is completely consistent with the CCC certification process. For details, please consult BORY.
Shenzhen BORY Testing Technology Service Co., Ltd. is one of the earliest laboratories engaged in EMC, Safety,RF,Chemical,Toy, textile & footwear testing in Mainland China. Currently, it has world-class testing equipment and professional testing personnel. It is a comprehensive, professional and international third-party testing company for industrial and consumer products. Inspection and verification organization. Since its establishment, the company has been engaged in EMC, Safety,RF,Chemical,Toy, textile & footwear testing and certification work, and has built two large experimental testing bases in Shenzhen and Guangzhou. Shenzhen BORY Testing Technology Service Co., Ltd. has built a large scale electromagnetic compatibility, safety, wireless, chemical, toy, textile & footwear testing laboratory. Covers an area of more than 2000 square meters (including shenzhen laboratory more than 1200 square meters, Guangzhou laboratory more than 800 square meters). The company strictly in accordance with ISO/IEC 17025(CNAS no. : L10206) quality standards for management. It has been recognized by many international certification bodies, including Germany TUV, EMCC, PTL, UK ITS, US UL,FCC,CEC,SIEMIC,TIMCO, Canada IC, Czech EZU, Hong Kong EMSD, Norway NEMKO and so on. Shenzhen BORY testing technology Service Co., Ltd. provides domestic and foreign manufacturers with certification application, standard consulting, testing, technical support, countermeasures, certification and other “one-stop” services. Through our efforts, you can obtain the most extensive and authoritative international certification in the shortest time.


您的电子邮箱地址不会被公开。 必填项已用*标注